Billion BiPAC 7402GL R4 User Manual page 72

Example: Configuring your firewall to allow a publicly accessible web server on your LAN
The predefined port filter rule for HTTP (TCP port 80) is the same whether the firewall is set to a
high, medium or low security level. To setup a web server located on the local network when the
firewall is enabled, you have to configure the Port Filters setting for HTTP.
As you can see from the diagram below, when the firewall is enabled with one of the three presets
(Low/Medium/High) security level selected, an inbound HTTP access is not allowed which means
remote access through HTTP to your router is not allowed.
Note: Inbound indicates accessing from the Internet to LAN and Outbound is from LAN to
the Internet.
72