Huawei OceanStor VIS6300 Quick Installation Manual page 32

The management network port module on the VIS6000 has two management network ports (one on the
left and the other on the right). This section takes the left management network port in the rear of the
VIS6000 as an example. The process to connect the management network port on the right is similar.
b
Laying Network Cables
Perform the operation of the scenario corresponding to the type of the management network (direct
connection networking or switch networking).
Scenario 1: Connecting the Management Network Port to the Ethernet
Switch
Scenario 2: Connecting the Management Network Port to the Maintenance Terminal
For details on outside the cabinet wiring of network cables (overhead wiring and underfloor wiring) from
the management network port to the maintenance terminal, see the appendix.
31