Huawei OceanStor VIS6300 Quick Installation Manual page 13

3 Locating and Installing Captive Nuts
a
Specifying the Installation Positions of Captive Nuts by Using
the Installation Template
b
Installing the Captive Nuts
1. Insert One Foot of the
Captive Nut into the Square
Hole and Make it Stuck to
the Pane of the Square Hole
4 Fixing the VIS6000 to the Cabinet
If the VIS6000 is fully configured, arrange more than three persons to carry them and take cares to
avoid injury to any person.
Carry the VIS600 by using the system subrack handle.
2. Insert the Other Foot of
the Captive Nut into the
Square Hole and Make it
Stuck to the Pane of the
Square Hole with a Captive
Nut Mount Bar
12
3. Status After Installation