Huawei OceanStor VIS6300 Quick Installation Manual page 39

5 Installing the Baffle to the Front of the VIS6000
When you unpack the unpacking of devices, the front baffle of the VIS6000 is not installed. After setting
the IP address of controller A and controller B and removing the cable, you can install the baffle to the
front of the VIS6000 by using the buckles on the baffle.
The baffle has four spring leaves that correspond to four fixed bolts in the system subrack. You can fix the
baffle to the system subrack by combing spring leaves and fixed bolts.
38