Data Collection; Express Install; Installing With Express Install - Kyocera ECOSYS M4132idn User Manual

Installation
5

Data Collection

Express Install

Installing with Express Install

1
2
3
4
5
6
1-3
Click OK.
Note: If you entered a different Read community name, the Devices list is
cleared. Click the Refresh icon to rediscover devices.
With this feature, you can help improve printer driver software by choosing to
participate in anonymous Data Collection. You can make this selection during
driver installation or from the Kyocera logo's About dialog box, located at the
bottom of Device Settings and the Printing Preferences dialog box.
Express Install refers to quick device, driver, and utility installation for a USB or
network connection in Windows operating systems. The installation application
discovers printing devices that are turned on, and connected by USB or network
cable. One or more feature packages can be installed together.
If the installer cannot find your printing system, contact your system
administrator.
Note: You must install .NET Framework 4.0 or later to use Status Monitor.
Ensure that your printing system and computer are turned on and connected by
USB or network cable.
In Express Install, the installer looks for your printing system. Each discovered
device is displayed in the device list as an icon with a model name and port
name.
If your device is discovered, select your model in the device list.
If discovery does not find your device, remove and reinsert the USB or network
cable, and ensure that it is connected properly. Click the Refresh icon to
rediscover devices.
You can also find a device by typing a partial or full search term in the search
text box above the device list. You can search the discovered devices by model
name, IP address, host name, or USB port. The results are displayed in the
device list. If the search finds your device, select it. Click the x icon to clear the
text box, and return to the list of all discovered devices.
You can select Use host name as port name to use a host name for the
Standard TCP/IP port. (Not available with a USB connection.)
The installer automatically selects all the features in the feature list. You can
select or clear any check box for individual features.
Review your settings. At least one device and one feature must be selected to
enable the Install button. If your settings are correct, click Install.
User Guide