Printing Multiple Pages Per Sheet; Scaling; Setting Scaling On The Page; Gutter - Kyocera ECOSYS M4132idn User Manual

Printing Multiple Pages per Sheet

1
2
3
4
5

Scaling

Setting Scaling on the Page

1
2

Gutter

Creating a Gutter

1
2
Printer Driver
An administrator can ensure that all jobs are printed with multiple pages on a
sheet by selecting Device Settings > Administrator > Lock Settings, and
then selecting Multiple pages per sheet.
In the Layout tab, click the Multiple pages per sheet icon.
In the Pages per sheet list, select the number of pages to print on each sheet of
paper.
In the Layout list, select the direction the pages should flow.
If you want to print a border around each page, select Print borders.
Click OK in all dialog boxes.
With this feature, you can increase or decrease text and graphics on a page.
You can also select a gutter setting that enlarges the margins to accommodate
manual stapling or manual hole punch.
If other Layout tab options are selected, Scaling is unavailable.
In the Layout tab, type or select a scaling percentage from 20 to 500.
Click OK in all dialog boxes.
With this feature, you can increase the margins around your text and graphics
on the left side and at the top of the printed sheet. Gutter is often used for
binding, manual hole punch, or stapling to make a print job easier to read. This
creates a larger margin space by shifting the printable area to the right, or down,
as much as one inch (25.4 mm).
Gutter width displays the unit of measurement in inches or millimeters. You
can change the Units setting in the User Settings dialog box, accessed from
Device Settings.
Note: For some models, when PCL XL, PCL 5e, or KPDL is selected as the
PDL, Gutter is available in the Finishing tab.
In the Layout tab, click Gutter.
Under Gutter width, type or select a value between 0.20 to 1.00 inches (5.0 to
25.4 mm).
Short edge (top)
Layout
6-2