Auto Configure; Enabling Auto Configuration - Kyocera ECOSYS M4132idn User Manual

Device Settings
4
5
6

Auto Configure

Enabling Auto Configuration

1
2
3-2
Select Shared box to enable the box for multiple users.
When the check box is selected, all network users can save jobs in the box.
When the check box is cleared, only the box owner and network administrator
can save jobs in the box.
To require users of a shared box to type a password before printing, select
Require password, and type a password up to 16 characters.
Click OK in all dialog boxes.
The new custom box appears in the Custom Box dialog box when printing.
You can remove a custom box by selecting it in the Defined custom boxes
list and clicking Delete.
You can import a custom box list by clicking Import and browsing for a valid
custom box list file (.CSV or .KXU).
You can save the current custom box list (.CSV or .KXU) in your computer or
network by clicking Export. A saved list can be imported into another printer
driver.
With this feature, you can detect the devices installed on a printing system that
is connected over a network. Auto Configure can detect input devices, output
devices, storage devices, memory, and RAM disk size. When your computer is
connected to the printing system through a TCP/IP or WSD port, the Auto
Configure button appears in Device Settings. Auto Configure updates the
Device options list, Memory, RAM disk, and overview images to keep the
printer driver consistent with the printing system configuration.
Not all installed devices are detected by using Auto Configure. Before
selecting OK in Device Settings, check the settings to make sure that they are
correct.
Silent Auto Configuration
Silent auto configuration checks the printing system every 10 minutes for
changes in optional devices or memory. When a change is detected, the driver
is automatically updated with the new settings.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Verify that all optional devices are attached to the printing system, and that it is
turned on and ready to print.
In Device Settings, click Auto Configure.
The Auto Configure dialog box opens. Select from Auto configure options:
Auto Configure Now
Click the button at any time to retrieve the current settings from the printing
system. It is recommended to do this when Silent auto configuration is
turned off.
Silent auto configuration
User Guide