Yamaha X MAX CZD300-A Owner's Manual page 81

2 2
1
1. Rear wheel sensor lead
2. Lead holder
6. Remove the V-belt case air filter
cover by removing the bolts.
2
2
1. V-belt case air filter cover
2. Bolt
7. Remove the air filter element, and
then blow out the dirt with com-
pressed air from the clean side as
shown.
1. V-belt case air filter element
1
1. Clean side
8. Check the V-belt case air filter ele-
ment for damage and replace it if
necessary.
Periodic maintenance and adjustment
1
1
8-17
9. Insert the element into the V-belt
case.
10. Install the V-belt case air filter cov-
er by installing the bolts.
11. Install the rear wheel sensor lead
into the holder at the white tape on
the lead as shown.
3 3
1
2 2
3
2 2
1. Rear wheel sensor lead
2. White tape
3. Lead holder
12. Install the air filter case bolts, and
then tighten the bolts to the spec-
ified torque.
Tightening torque:
Bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
13. Install the V-belt case cover by in-
stalling the screws.
3
8