Yamaha X MAX CZD300-A Owner's Manual page 52

Instrument and control functions
dent. Be sure to tighten the
screws to the specified torque.
[EWA15511]
1
5
1. Bolt
Tightening torque:
Windshield bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
5. Place the bolt access covers, and
then install the quick fasteners.
1
1. Bolt access cover
To change the windshield height to
the low position
1. Remove the bolt access covers by
removing the quick fasteners.
2. Remove the windshield by remov-
ing the bolts.
3. Remove the bolts, and then install
the bolts in the desired position.
5-22
1
1
1
1. Bolt
1
1
1. Bolt
4. Install the windshield to the low
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windshield could cause an acci-