Replacing The Fuses - Yamaha X MAX CZD300-A Owner's Manual

Replacing the fuses

The main fuse and the fuse boxes,
which contain the fuses for the individ-
ual circuits, are located under panel A.
(See page 8-7.)
TIP
To access the main fuse, remove the
starter relay cover as shown.
1
4
1. Fuse box
2. Main fuse
3. Spare main fuse
4. Starter relay cover
Periodic maintenance and adjustment
EAU78242
1. Signaling system fuse
2. ABS control unit fuse
3. Main fuse 2
4. Radiator fan motor fuse
5. Backup fuse
2
6. Spare fuse
7. ABS motor fuse
3
8. ABS solenoid fuse
9. Turn signal light and hazard fuse
10.Terminal fuse 1
11.Answer back fuse
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
8-29
1
2
3
4
6
5
Specified fuses:
7
8
6
9
10
11
3. Turn the main switch on and turn
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
Main fuse:
20.0 A
Main fuse 2:
7.5 A
Terminal fuse 1:
2.0 A
Signaling system fuse:
10.0 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
7.5 A
Turn signal light and hazard fuse:
7.5 A
ABS control unit fuse:
7.5 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
15.0 A
Answer back fuse:
2.0 A
on the electrical circuit in question
to check if the device operates.
8