Table of Contents
Advertisement
LANCOM 1722 VoIP – LANCOM 1724 VoIP
Chapter 6: Linking two networks
6.2
Instructions for LANconfig
Perform the configuration on both routers, one at a time.
6.3
Instructions for WEBconfig
Perform the configuration on both routers, one at a time.
106
Launch the 'Connect two local area networks' wizard. Follow the wizard's
instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Finish.
After finishing the configuration of both routers, you can test the network
connection. Try to contact a computer in the remote LAN (e.g. with a
ping). The LANCOM Router should automatically set up a connection to
the remote station and contact the required computer.
Under WEBconfig, the coupling of networks via VPN cannot be con-
figured using the wizard. It can only be set up in the expert configu-
ration. For details, please see the reference manual.
From the main menu, launch the 'Connect two local area networks' wiz-
ard. Follow the wizard's instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Terminate.
After finishing the configuration of both routers, you can test the network
connection. Try to contact a computer in the remote LAN (e.g. with a
Advertisement
Table of Contents
