Table of Contents
Advertisement
OPERATING
INSTRUCTIONS
Electronic
Control
Panel
Model
You can easily
operate
this air conditioner
by pressing
relevant
button on the control panel as well as the remote
control
(-_)] Button
The air conditioner
will be started when
it is energized
or will be
stopped
when it is in operation,
if you press this button.
When the
air conditioner
is heating,
allow
3 minutes
after you
press
this
button.
Mode
Button
Each time MODE
button
is pressed, the operation
mode
is changed
in sequence:
COOL:
COOLING
- FAN ONLY
- ENERGY
SAVING
-
COOLING
HEAT:
COOLING
- FAN ONLY
- HEATING
-
ENERGY
SAVING
- COOLING
NOTE:
After setting the mode.
allow 3 minutes
before
switching
to another
mode.
In the FAN ONLY Mode,
room temperature
display
range
is from
O°C (3"-°V) to 38"C
(99°F).
Room temperature
below
32°F, the temperature
display
L0.
Room temperature
above 99°F, the temperature
display
H1.
Fan Speed
Button
Used to select fan speed in sequence
auto, low. medium,
and high.
Timer
Button
Used to set or cancel timer operation.
When the unit is in operation,
you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range
is 0 to 24 hours.
If the OFF TIMER
is set. the timer
LED
displays
the remaining
time to turn off the unit for only
12 seconds,
then LED
shifts to
display
set temperature.
If you press TIMER
button
within
the 12
seconds,
OFF TIMER
will be canceled.
If the ON TIMER
is set. the timer LED displays
the remaining
time
to turn
on the unit.
If you
want
to cancel
ON TIMER,
press
TIMER
button.
•
•
Button
Used to set room temperature
in COOLING
mode
or used to set
time in TIMER
mode.
If the two keys are pressed
at the same time,
the temperature
LED display
will alternate
between
°C and OF.
NOTE:
Temperature
setting
range
is from
19°C
(66°F)
to
31°(7
(88°F).
Indication symbols of LED on control panel:
Auto fan speed
_
Cooling
I_11 I--! "F
nO
h
LOWfan speed
_
Fan only
Display set temp
Display set timer
Medium fan speed
-,_- Heating
High fan speed
421:Energy_saving
@ Timer
Above LED lights on when the relevant mode is in used.
Fig. 28 - Control
Panel
12
Advertisement
Table of Contents
