Names Of Parts; Indoor Unit; Outdoor Unit; Indication Lamp - Carrier WALL MOUNTED AIR CONDITIONER Owner's Manual

NAMES OF PARTS

Indoor unit

8

Outdoor unit

9
10

Indication lamp

Signal receiver
Names of parts
Indoor unit
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver(inside)
7. Display panel
Outdoor unit
8. Connecting pipe
9. Connecting cable
10. Stop valve
NOTE:
All the pi ctures in this manual are for
explanation purposes only. The actual shape
of the indoor unit you purchased may be slight
different on front panel and display window.
actual shape shall prevail.
Indication lamp
ION indica tion lamp(optional func tion)
This lamp illuminates when Clean
Air feature is activated .
DEFROST i
ndication lamp
(Enabled on cooling & heating models only):
Lights up when the air conditioner starts
defrosting automatically or when the warm
air control feature is activated in heating
operation.
OPERATION indication lamp
This lamp illuminates when the air
conditioner is in operation.
TIMER in dication la mp
Lights up during Timer operation.
Temperature indicator
Displays the temperature settings when the
air conditioner is operational.
Displays the malfunction code.

Special functions

Refrigerant Leakage Detect ion
With this new technology, the dipsplay area will appear EC and the indication lamps
continue flashing when the outdoor unit detects refrigerant leakage.
Louver Angle Memo ry Function(optional):
Within the scope of safety angle, it w ill memorize the open angle of hor izontal louver.
If it exceeds, it will memorize the bo undry of safety angle. In the following circumstances,
it will return to standard angle: 1) pre ssing the manual switch, 2)unplug and then plug
in the machine. S o we strongly su ggest that th e open angl e of the horiz ontal louver should
not be se t too small, in case the co ndensed wa ter forms and drops from the horizont al louver.
SELF CLE AN func tion（
Function used after the Shut Down of cooling operation to clean the Evapor ator
and keep it as fresh for the next operation.
The unit will oper ate as follow ing sequence : FAN ONLY mode at Low fan speed--Heating
operat ion with LOW fan speed(a pplicable to cooling & heating modles only) ---FAN ONLY
operat ion--S top Operation---Turn off.
Note:
This function is only available under COOL(AUTO COOL, FORCED COOL) and DRY mode.
The
Before select the function, it is recommended to run the a ir conditione r under Cooling
operat ion for about half an hour. Once the Self Clean function is activated, all TIMER
setting will be cancelled.
During Self Clean operation, when pr ess the SELF CLEAN button on the remote
controller again wil l stop the operation and turn off the unit automatically.
CLEAN AIR funct ion (on some m odels)
This air conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specif ic
configuration of the model). With the anion s generated by Ionizer, the air circulation of th e air
conditioner fills the room with refreshing, n atural and healthy air. The Plasma Dust Collector
generates a high voltage ionization zone, t hrough which the air is converted to plasma. Inside
the air most of the dust, smoke, and pollen particles are captured by the electrostatic filter.
Anti-mildew funct ion（
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on
HEAT mode, the unit will continue operating for a bout 30 seconds at LOW fan speed. This will
help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.
Vertical swing func tion（
After the AC starts up, users can control the vertical louver swing by the remote controller.

OPERATING INSTRUCTIONS

, ,
）
Optio nal
）
Optional
）
Optio nal