Table of Contents
Advertisement
Fundamentals, File Management | Working with the file manager
Data transfer to or from an external data carrier
Before you can transfer data to an external data
medium, you must set up the data interface.
Further information:
page 479
To call the file manager, press the PGM MGT key.
Select the screen layout for data transfer: press
the WINDOW soft key.
Use the arrow keys to move the cursor to the file you wish to
transfer:
Moves the cursor up and down within a window
Moves the cursor from the right to the left
window, and vice versa
If you wish to copy from the control to the external data medium,
move the cursor in the left window to the file to be transferred.
If you wish to copy from the external data medium to the control,
move the cursor in the right window to the file to be transferred.
Select another drive or directory: Press the
SHOW TREE soft key
Use the arrow keys to select the desired
directory
Select the desired file: Press the SHOW FILES
soft key
Use the arrow keys to select the file
Transfer a single file: Press the COPY soft key
Confirm with the OK soft key or with the ENT key
A status window appears on the control, informing about the
copying progress, or
Stop transfer: Press the WINDOW soft key
The control displays the standard file manager
window again.
HEIDENHAIN | TNC 128 | Conversational Programming User's Manual | 10/2017
"Setting up data interfaces",
3
149
Advertisement
Table of Contents
