Installation Site; Restrictions; Configuration - Siemens FDS221-W Technical Manual

4.3 Installation site

4.4 Restrictions

4.5 Configuration

Building Technologies
Fire Safety
The alarm sounder FDS221 can be mounted directly on the ceiling or the wall.
The device must be easily accessible for commissioning and maintenance so that
it can communicate with the detector exchanger and tester FDUD292 or the
intelligent detector tester FDUD293 via the interface (MC link).
You will find more information in documents 007227 and 009718.
Status queries with detector exchanger and tester FDUD292 or intelligent
detector tester FDUD293 are only possible with devices of the 'Sinteso' product
line on the FDnet.
Figure 4: Installation of the alarm sounder on the wall or ceiling
Not compatible with the sounder base FDSB29x
Devices with a product version <30 cannot be synchronized with the sounder
base FDSB291
Synchronization with the sounder base FDSB291 and with other alarm
sounders is only possible for devices with a product version ES 30.
The following chapters contain the specifications of the different tones. The
specifications differ for alarm sounders with product version ES < 30 and product
version ES 30.
The product version (ES) is specified on the packaging label and on the device
label.
Project engineering
4
Installation site
25 | 50
008109_m_en_--
2016-02-09