Standards And Directives Complied With; Release Notes - Siemens FDS221-W Technical Manual

Safety
2

Standards and directives complied with

2.3 Standards and directives complied with

2.4 Release Notes

14 | 50
Building Technologies
Fire Safety
A list of the standards and directives complied with is available from your Siemens
contact.
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non-existent fire detection
Personal injury and damage to property in the event of a fire.
Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
008109_m_en_--
2016-02-09