Mounting / Installation
5
Base attachment FDB291
5.1 Base attachment FDB291
30 | 50
Building Technologies
Fire Safety
Use the base attachment FDB291 for surface-mounted cable entry and cable
diameters between 6 mm and 21 mm.
1. Break out the required cable entries on the base attachment FDB291.
2. Insert the cables through the break-outs in the base attachment FDB291.
Figure 7: Installation of detector base on base attachment FDB291
1 Identification
2 Base attachment
See also
Addressable detector base FDB221/FDB221-AA [
Addressable detector base, flat FDB222 [
3 Detector base acc. to
'Accessories' chapter
19]
19]
008109_m_en_--
2016-02-09