Storing Abcd Information; Freezing A Reading On The Display Panel; Setup Mode - UE Systems ULTRAPROBE 10000 Instruction Manual

Version 1
Display is not shown, spin until Storage Display is shown and blinking. Click the Yellow Enter
button. The Display Screen will be split. All inspection data will be displayed on the top half while
the stored information will be displayed on the bottom half of the Display Screen.

Storing ABCD information

To Store information when the ABCD Function has been set:
1. When Click ENTER for Store (A) is blinking, press ENTER
2. Then Click ENTER for Store (B) will then blink, press ENTER
3. Then Click ENTER for Store (C) will blink, press ENTER
4. Then Click ENTER for Store (D) will blink, press ENTER
5. The function will then shift to STORE DATA
6. Press ENTER and all four dB levels will be stored at the selected Record Number.
42 dB
S=60 A: 0dB C: 0dB
B: 0dB
Press EN-
TER
for Store (A)

Freezing a reading on the display panel

If in a test situation where it is difficult to view the display panel, when in the Timed Off Mode the decibel
reading can be frozen for viewing. If using the Stethoscope Module, continue to touch the test point and
then release the trigger. Remove the instrument and view the panel. Be sure to view within the set timed
off period (ex: within 5 seconds if set for 5 second off) If in the scanning mode, point at target, release
the trigger as described.

Setup mode

There are 35 functions that can be set to either change the display screens or the format of data
entry and collection.
1 Data Transfer
2 Display Screens
3 Application Select
4 Module type select
5 Instrument Setup (Manual or Auto) 22
6 Alarm Enable/Disable
7 Set Record Time
8 Record WAV on Alarm
9 Select Function List
10 Text Editor Select
11 MORE (moves to second level)
SECOND LEVEL SET UP MODE
12 Default Settings
13 User Sensitivity Default
14 User Frequency Default
15 Frequency Adjust (Yes or No)
16 Restore Lists
17 Set Shut Off Mode
25 kHz
002 Rec
D: 0dB
18 Set Turn Off Time
19 Set WAV Sample Rate
20 Display Response
21 Communication Flow Control
Line Input Select
23 Sensitivity Mode
24 Headphone Volume
25 Enter Inspector ID
26 Set time and Date
27 Date Format Select
28 Cal Due Date
29 Standard or Metric Units
30 Display Mode Select
31 dB Scale Type Select
32 dB Offset Value
33 Auto Store to CF
34 Upgrade UE10K PGM
35 BACK (moves to First level)
25