Summary of Contents for UE Systems Ultrasound Ultraprobe 10,000
Page 1
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training Needed: Ultraprobe 10,000 and CF card; Possible Accessories: Remote Magnetic Stethoscope Module; Rubber Focusing Probe;...
Page 2
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training If baselining the route, have Instrument Setup in If you are PERFORMING the BASELINE Readings, Manual.
Page 3
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training Rotate to Module Type Select, push Sens.Knob. Rotate to Instrument Setup, Push Sens.Knob. Rotate to Stethoscope (STM) or Remote Magnet Rotate for "Manual", Push Sens.Knob to Select/Exit...
Page 4
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training Push Sens.Knob 1X to move cursor to Frequency. IF Route has been baselined and established refer Rotate to 30 kHz (or lower for slower speed to NOTE.
Page 5
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training NOTE: Choose your test point. NEVER place the module on the fan Shroud. This will give a false reading! Correct positions are shown in the pic.
Page 6
Ultrasound Ultraprobe 10,000 Instructions Testing Bearings Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES Work Verify 2-5 min UE Systems Training [Store Record: Adjust Sens. for dB] OR [Record Visual Instructions exist for Storing a Record or WAV: Adjust Sens (dB) AND Intensity Meter (2-4 Recording a Sound WAV.