Wirepath WPS-300-CUB-IP-WH Quick Start Manual page 18

Network Cube Camera· · · · Quick Start Guide
Steps:
1. Connect the phone to the Wi-Fi network.
2. Install the iVMS-4500 mobile client software to the phone.
3. Open the iVMS-4500 mobile client software and enter the Wi-Fi
configuration interface to add the device.
4. Input the device serial No. or use your phone to scan the serial No.
on the device label by aligning the QR Code or Barcode with the
scanning frame.
5. Click Next and input the password (if required) of the Wi-Fi
network that your phone connects to.
6. Follow the prompts to finish the Wi-Fi connection.
7. The mobile client software obtains the device IP address
automatically after the Wi-Fi established. For the first-time login,
you are required to activate the camera first.
Refer to the iVMS-4500 User Manual for more detailed instructions.
18