Standard Accessories - Konica Minolta CM-3600A Instruction Manual

Standard Accessories

White Calibration Plate CM-A139
Used to perform white calibration for measurement
of reflectance and to perform measurement
of transmittance. A CD-ROM containing white
calibration data and software for writing the white
calibration data are supplied with this accessory.
Target Mask
Used to change the illumination area (measurement
aperture) according to the specimen.
Measurement and illumination (aperture area at specimen
surface) areas for each target mask are as follows:
CM-A105（LAV） : ø25.4 mm /ø30 mm
CM-A106（MAV） : ø8 mm /ø11 mm
CM-A107（SAV） : ø4 mm /ø7 mm
Zero Calibration Box
Used to perform zero calibration for measurement
of reflectance and to perform haze measurement
at measurement of transmittance.
AC Adapter
Used to supply power from an AC
outlet to the CM-3600A.
Input: 100 to 240 V
Output: 8 V 1.5 A
Plug design:
USB Cable (3 m)
Used to connect the instrument to
a personal computer (PC).
Accessory Case
Dust Cover
CM-A105
CM-A106
CM-A107
CM-A104
AC-A308
50/60 Hz
Center-negative
IF-A21
CM-A215
CM-A110
8