Names And Functions Of Parts - Konica Minolta CM-3600A Instruction Manual

Names and Functions of Parts

1
2
3
4
6
7
8
9
① Viewfinder .............................Used to locate the position of the specimen for measurement of reflectance.
② Transmittance chamber .......Place the specimen in this chamber to perform
③ Target mask ..........................Select a suitable target mask (for ø30 mm (LAV), ø11 mm (MAV) and ø7 mm
④ Sample holder .......................Used to hold the specimen, white calibration plate or zero calibration box.
⑤ Power switch .........................Used to turn power ON and OFF.
⑥ Transmittance chamber cover ...Covers the transmittance chamber used for transmittance measurements.
⑦ Viewfinder cover ...................Open this cover to check the position of the
⑧ USB connection terminal .........Used to connect the instrument to a PC with the supplied USB cable
⑨ AC adapter input socket .........Used to connect the AC adapter supplied with the CM-3600A.
5
measurement of transmittance.
(SAV) illumination) according to the specimen and attach it to the CM-3600A.
specimen for measurement of reflectance.
(IF-A21 or IF-A22).
11