Table of Contents
Advertisement
Super X11DPU-X/-XLL User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
JF1
VPP_CPU2
JNVI2C2
LE2
JL1
P2_NVMe1
NVME12
P2_NVMe2
NVME13
FAN8
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 12 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (13)
VGA
COM1
IPMI_LAN
LEDM1
IPMI
UM5
JLAN1
BMC
BIOS
JSDCARD1
JPME1
JBT1
RAID KEY-1
PCH
U45
BT1
SP1
JSD1
JSD2
DESIGNED IN USA
X11DPU-X
REV:1.01A
IPMI CODE
BAR CODE
CPU2
FAN7
FAN6
FAN5
24
Standoffs (13)
Only if Needed
USB0/1(3.0)
JPME2
JP2
JRK1
PSU2
PSU1
VPP_CPU1
NVME 10 NVME11
P1_NVMe2
P1_NVMe1
JNVI2C1
BIOS
LICENSE
CPU1
FAN4
FAN3
FAN2
FAN1
Advertisement
Table of Contents
