Table of Contents
Advertisement
Super X11DPU-X-XLL User Manual
The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32)
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM file if the media size becomes too
large due to the huge volumes of folders and files stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a different machine, copy the "Super.ROM" binary image file into the Root "\"
directory of a USB device or a writable CD/DVD.
Notes: 1. If you cannot locate the "Super.ROM" file in your drive disk, visit our website
at
www.supermicro.com
age into a USB flash device and rename it "Super.ROM" for the BIOS recovery use. 2.
Before recovering the main BIOS image, confirm that the "Super.ROM" binary image
file you download is the same version or a close version meant for your motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.
3. After locating the healthy BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.
to download the BIOS package. Extract the BIOS binary im-
126
Advertisement
Table of Contents
