Motherboard Features - Supermicro X11DPU-XLL User Manual

Hide thumbs Also See for X11DPU-XLL:
Table of Contents

Advertisement

Motherboard Features

CPU
Dual 81xx/61xx/51xx/41xx/31xx series processors (Socket P); each processor supports Socket P and Intel® UltraPath
Interconnect (UPI) of up to 10.4 G/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
For X11DPU-X, the integrated memory controller supports up to 2TB of 3DS LRDIMM (3DS Load Reduced DIMM), LRDIMM
(Load Reduced DIMM), 3DSRDIMM (3DS Registered DIMM), RDIMM (Registered DIMM), NV-DIMM (Non-Volatile DIMM)
DDR4 (288-pin) ECC 2666/2400/2133 MHz memory modules in 16 slots.
For X11DPU-XLL, the integrated memory controller supports up to 2TB of LRDIMM (Load Reduced DIMM), RDIMM
(Registered DIMM), ECC 2666/2400/2133 MHz memory modules in 16 slots. NV-DIMM (Non-Volatile DIMM) DDR4 (288-
pin), 3DSLRDIMM and 3DSRDIMM are supported when requested by OEM only.
DIMM Size
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
Intel® C621
Expansion Slots
1 PCI-E 3.0 (x16 + x16) WIO left riser card support
1 PCI-E 3.0 x8 (in x16) WIO center right hand riser
1 PCI-E 3.0 (x16 + x16 + x8) far right Ultra IO Riser Slot
4NVMe (x4) PCIe slots)
Network
BMC RJ45 ports and LAN options via Ultra Riser
BaseBoard Management Controller (BMC)
ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
One (1) IPMI_dedicated_LAN located on the rear IO backpanel
Graphics
Graphics controller via ASpeed AST2500
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

X11dpu-x

Table of Contents