Table of Contents
Advertisement
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JPG1
VGA Enable/Disable
JPME2
Manufacturing Mode
JWD1
Watch Dog Timer Enable
LED
Description
LE2
Standby PWR LED
LED1
UID LED
LEDM1
BMC Heartbeat LED
Connector
Description
BT1
Onboard CMOS Battery
COM1
COM Port
FAN1 ~ FAN8
System/CPU Fan Headers (FAN1: CPU Fan)
IPMI_LAN JLAN1
IPMI-Dedicated LAN Port
I-SATA0 ~ I-SATA7
SATA 3.0 ports supported by Intel PCH
JF1
Front Control Panel Header
JGPW1 - JGPW4
(GPU PWR1 - GPU PWR4) Power connectors used for GPU and VGA devices
JIPMB1
System Management Bus Header for IPMI 2.0
JL1
Chassis Intrusion Header
JNVI
C1, JNVI
C2
VPP_CPU1, VPP-CPU2 - System Management Bus
2
2
JP2
Complex Programmable Logic Device (CPLD) header
JPW1 - JPW4
(BP PWR1 - BP PWR4) Backplane power connectors for hard drives
JRK1
Intel RAID key header for NVMe Solid State Devices (SSD)
JSDCARD1
SD Card Socket
JSD1 - JSD2
SATA Disk-on-module (DOM) Power Connectors
JTPM1 TPM/PORT80
Trusted Platform Module/Port 80 Connector
JUIDB2
Unit Identifier (UID) Switch
JUSB3 USB3/4(3.0)
Internal USB header for two USB 3.0 connections (USB Port 3/Port 4)
JUSBA1 USB2(3.0)
Type A USB 3.0 header (Port 2)
JVRM1
VRM programming header (reserved for internal use only)
NVME10, NVME11
P1_NVMe1, P1_NVMe2; On-Board NVMe 1 and 2 for high speed PCI-E storage devices on CPU1
NVME12, NVME13
P2_NVMe1, P2_NVMe2; On-Board NVMe 1 and 2 for high speed PCI-E storage devices on CPU2
PSU1
Power Supply Unit 1
PSU2
Power Supply Unit 2
SATA 4,5
(Powered) SATA connectors with power-pins built-in with support of SuperDOM
SP1
Internal Speaker/Buzzer
S-SATA0-3 (SATA DOM)
SATA 3.0 ports supported by Intel SCU
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Green: Standby Power On
Solid Blue: Unit Identified
Blinking Green: Normal
13
Chapter 1: Introduction
Advertisement
Table of Contents
