Table of Contents
Advertisement
Super X11DPU-X/-XLL User's Manual
CMOS Clear
JBT1 is used to clear CMOS, which will also clear any passwords. Instead of pins, this jumper
consists of contact pads to prevent accidentally clearing the contents of CMOS.
To Clear CMOS
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard.
3. Remove the onboard battery from the motherboard.
4. Short the CMOS pads with a metal object such as a small screwdriver for at least four
seconds.
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
Note: Clearing CMOS will also clear all passwords.
Do not use the PW_ON connector to clear CMOS.
JF1
VPP_CPU2
JNVI2C2
LE2
JL1
P2_NVMe1
NVME12
P2_NVMe2
NVME13
FAN8
VGA
COM1
IPMI_LAN
LEDM1
IPMI
UM5
JLAN1
BMC
BIOS
JSDCARD1
JPME1
JBT1
RAID KEY-1
1
PCH
U45
BT1
SP1
JSD1
JSD2
DESIGNED IN USA
X11DPU-X
REV:1.01A
BAR CODE
CPU2
FAN7
FAN6
FAN5
56
USB0/1(3.0)
JPME2
JP2
JRK1
1. Clear CMOS
PSU2
PSU1
VPP_CPU1
NVME 10 NVME11
P1_NVMe2
P1_NVMe1
JNVI2C1
BIOS
LICENSE
IPMI CODE
CPU1
FAN4
FAN3
FAN2
JBT1 contact pads
FAN1
Advertisement
Table of Contents
