Introduction; Hardware Requirements; Software Requirements - Chelsio Communications Terminator series Installation And User Manual

Chapter III. iWARP

1. Introduction

The iWARP (iw_cxgbe) driver provides support for iWARP including RDMA, DDP and MPA
protocols.
1.1.

Hardware Requirements

1.1.1. Supported Adapters
Following are the currently shipping Chelsio adapters that are compatible with the iWARP
driver:
T62100-CR
T62100-LP-CR
T6425-CR
T6225-CR
T6225-LL-CR
T580-CR
T580-LP-CR
T540-CR
T520-CR
T520-LL-CR
T420-CR
T440-CR
T422-CR
T404-BT
1.2.

Software Requirements

Currently the iWARP driver is available for the following version(s):
FreeBSD 10.3-RELEASE
FreeBSD 11.0-RELEASE
Other versions have not been tested and are not guaranteed to work.
Chelsio Unified Wire for FreeBSD
24