Userland Tools - Chelsio Communications Terminator series Installation And User Manual

Chapter I. Chelsio Unified Wire
e. Build and install the kernel as follows:
[root@host~]# make buildkernel
[root@host~]# make installkernel
f. Add the following entries to /boot/loader.conf to enable capabilities:
hw.cxgbe.config_file="flash"
hw.cxgbe.iscsicaps_allowed=0xf
g. Reboot the machine for changes to take effect.
h. After reboot, check if you have booted to the right kernel by executing
You should see a similar output:
5. Verify that the kernel supports TOE:
[root@host~]# config -x /boot/kernel/kernel | grep TCP_OFFLOAD
options TCP_OFFLOAD
3.2.

Userland Tools

Build and install cxgbetool
[root@host~]# cd /usr/src/usr.sbin/cxgbetool
[root@host~]# make && make install
Chelsio Unified Wire for FreeBSD
uname -a .
12