Download Print this page

Software/Driver Unloading; Unloading The Nic Driver Module; Unloading The Toe Driver Module - Chelsio Communications Terminator series Installation And User Manual

Wire for freebsd

Hide thumbs Also See for Terminator series:

Table of Contents

Chapter II. Network (NIC-TOE)

4. Software/Driver Unloading

4.1.

To unload the NIC driver, stop all the running traffic and run the following command:

[root@host~]#

kldunload if_cxgbe

NIC module cannot be unloaded if TOE module is loaded.

Note

4.2.

To unload the TOE driver, reboot the system.

Chelsio Unified Wire for FreeBSD

Table of Contents

Do you have a question about the Terminator series and is the answer not in the manual?