Firmware Update - Chelsio Communications Terminator series Installation And User Manual

Chapter I. Chelsio Unified Wire
3.3.

Firmware Update

Firmware will have to be loaded manually. Run the following commands for T6 adapters:
[root@host~]# kldload if_cxgbe
[root@host~]# cxgbetool t6nexX loadfw ChelsioUwire-FBSD-
x.x.x.x/firmware/t6fw-x.xx.xx.x.bin
[root@host~]# cxgbetool t6nexX loadcfg ChelsioUwire-FBSD-
x.x.x.x/firmware/t6-config.txt
Reboot system for changes to take effect.
Firmware version can be verified using:
[root@host~]# sysctl -n dev.t6nex.X.firmware_version
For T5 adapters, use t5nex as the parent device, t5fw-x.xx.xx.x.bin as the
Note
firmware binary file and t5-config.txt as the firmware configuration file. Similarly,
for T4 adapters, use t4nex, t4fw-x.xx.xx.x.bin and t4-config.txt respectively.
Chelsio Unified Wire for FreeBSD
13