Chelsio Communications Terminator series Installation And User Manual page 11

Chapter I. Chelsio Unified Wire
The above outputs indicate the hardware configuration of the card as well as the Serial number
of the card. As observed by the x8, the card is properly installed in an x8 slot on the machine
and the card is using MSI-X interrupts.
Network device names for Chelsio's physical ports are assigned using the
Note
following convention: the port farthest from the motherboard will appear as the
first Ethernet network interface. However, for T5 40G and T420-BT adapters, the
association of physical Ethernet ports and their corresponding network device
names is opposite. For these adapters, the port nearest to the motherboard will
appear as the first network interface.
Chelsio Unified Wire for FreeBSD
10