Network Device Configuration - Chelsio Communications Terminator series Installation And User Manual

Chapter II. Network (NIC-TOE)
2. For T6, bring up the interface and enable TOE:
[root@host~]# ifconfig ccX up
[root@host~]# ifconfig ccX toe
For T5 and T4, use cxlX and cxgbeX respectively.
3. Create the policy_file.
Example:
The below policy will offload only connections to port number 5001.
[L] port 5001 => offload
[P] port 5001 => offload
4. Apply the policy using the cxgbetool.
[root@host~]# cxgbetool t6nexY policy <policy_file>
For T5 and T4, use t5nexY and t4nexY respectively.
For more information on additional parameters and examples, refer cxgbetool
Note
manual by running the
3.5.

Network Device Configuration

Please refer to the operating system documentation for administration and configuration of
network devices.
Some operating systems may attempt to auto-configure the detected hardware
Note
and some may not detect all ports on a multi-port adapter. If this happens,
please refer to the operating system documentation for manually configuring the
network device.
Chelsio Unified Wire for FreeBSD
man cxgbetool
command
21