Chelsio Communications Terminator series Installation And User Manual page 10

Chapter I. Chelsio Unified Wire
b. For T5 adapters:
For Chelsio adapters, the physical functions are currently assigned as:
Physical functions 0 - 3: for the SR-IOV functions of the adapter
Physical function 4: for all NIC functions of the card
Physical function 5: for iSCSI
Physical function 6: for FCoE
Physical function 7: Currently not assigned
Once driver is installed and loaded, run the following commands and examine the output to see
if the card is discovered.
[root@host~]# sysctl dev.t5nex.0.%desc
dev.t5nex.0.%desc: Chelsio T520-LL RNIC (rev 0), S/N:RE16130313,
E/C:0000000000000000
[root@host~]# dmesg
t5nex0: <Chelsio T520-LL-CR> mem 0xe5300000-0xe537ffff,0xe4000000-
0xe4ffffff,0xe5884000-0xe5885fff irq 16 at device 0.4 on pci1
t5nex0: PCIe x8, 2 ports, 14 MSI-X interrupts, 31 eq, 13 iq
Chelsio Unified Wire for FreeBSD
9