Hydraulic Tool Circuit Instructions (Optional); Tool Circuit - JLG 600SC Operation And Safety Manual
S/n 74785 to present
Hide thumbs
Also See for 600SC:
- Service and maintenance manual (238 pages) ,
- Operator's and safety manual (74 pages) ,
- Service and maintenance manual (216 pages)
Table of Contents
Advertisement
SECTION 4 - MACHINE OPERATION
4.11 HYDRAULIC TOOL CIRCUIT INSTRUCTIONS
(OPTIONAL)
Tool Circuit
To Operate: (with engine running and foot switch released).
1. Be sure hydraulic switch is in the "OFF" position.
Located on the left side of platform below console box.
2. Make sure the hydraulic tool about to be operated is at a
"safe" setting.
4-16
3. Plug tool it into quick-disconnect fittings mounted on
platform rail. The male quick connect is the pressure
feed line.
4. Set flow control knob to desired setting.
– JLG Lift –
3121156
Advertisement
Table of Contents
