Siemens MC35 Terminal User Manual page 50

Remote-SAT User's Guide
P R E L I M I N A R Y
1.5.2.10 AT^SSTR Remote-SAT Response – Get Inkey (34)
Write command The TA provides a response that can indicate the user's intentions, and include
the input key.
AT^SSTR=34,
<status>, ,
Response
<inputString>
OK
Parameters
<cmdType> 34 – Proactive command ID, see Table 1
<status>
<inputString> User response entered as a string parameter.
Coding of any input character is related to the selected alphabet:
•
•
•
Reference Note
Siemens The alphabet – and therefore the set of allowed characters - is specified by the
ME in the response to the related AT^SSTGI. However, do not mix up this
alphabet with the one selected for the alphabet format on the transmission line
on SAT activation, i.e. second parameter of AT^SSTA).
MC35_SAT_01_V01.01a - Preliminary
Unsigned Integer, range 0-255
0 Command performed successfully
16 Proactive SIM session terminated by user
17 Backward move in the proactive SIM session requested
by the user
18 No response from user
19 Help information required by the user
32 TA currently unable to process command
132 TA currently unable to process command because
screen is busy.
Input of a character in case of ANSI character set requests one byte , e.g.
"Y".
Input of any characters in UCS2 alphabet requests a 4 byte set, e.g. "0059"
is coding the same character "Y".
Coding of an empty string is done as a "\1b" string with every alphabet.
Page 50 of 64 15.11.2001