At^sstgi Remote-Sat Get Information - Select Item (36) - Siemens MC35 Terminal User Manual

Remote-sat
Hide thumbs Also See for MC35 Terminal:
Table of Contents

Advertisement

Remote-SAT User's Guide
P R E L I M I N A R Y
1.4.13 AT^SSTGI Remote-SAT Get Information – Select Item (36)
Write command
This command is to be used upon receiving an unsolicited result code
^SSTN:36.
AT^SSTGI=36
The TA is supplied with a list of items allowing the user to select one. Help can
be requested by the user, if available and the presentation style is specified.
In addition to text strings and icon identifiers, a next action indicator informs the
user of the likely result of selecting a chosen item.
Response
The first line of output from the ME is:
^SSTGI: <cmdType>, <commandDetails>, <numOfItems>, <titleText>,
<defaultItemId>, <itemIconsPresent>, <itemIconsQualifier>, <titleIconQualifier>,
<titleIconId> <CR> <LF>
One line follows for every item, repeated for <numOfItems>:
^SSTGI: <cmdType>, <itemId>, <itemText>, <nextActionId>, <iconId>
<CR><LF>
Parameters
<cmdType>
<commandDetails>
<numOfItems>
<titleText>
<defaultItemId>
<itemIconsPresent>
<itemIconsQualifier> Unsigned Integer, range 0 – 255, used as a bitfield.
MC35_SAT_01_V01.01a - Preliminary
36 – Proactive command ID, see Table 1
Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1:
0 = presentation type is not specified
1 = presentation type is specified in bit 2
bit 2:
0 = presentation as a choice of data values if bit
1 = '1'
1 = presentation as a choice of navigation
options if bit 1 is '1'
bit 3:
0 = no selection preference
1 = selection using soft key preferred
bits 4 to 7: = RFU
bit 8:
0 = no help information available
1 = help information available
Number of items in the list
String giving menu title
id of default item
The SIM may supply with the list an indication of the
default item, e.g. the previously selected item.
0 = no default item issued by the SIM application
>1 = Any value greater than 0 shall be used as an id of
the default item.
0 = no Icons
1 = Icons present
bit 1:
0 = icons are self explanatory and replace text
1 = icons are not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is
Page 35 of 64
15.11.2001

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc35 module

Table of Contents