Siemens MC35 Terminal User Manual page 46

Remote-SAT User's Guide
P R E L I M I N A R Y
1.5.2.6 AT^SSTR Remote-SAT Response – Send Short Message (19)
Write command The TA acknowledges the successful receipt of the proactive command.
AT^SSTR=19,
Response
<status>
OK
Parameters
<cmdType> 19 – Proactive command ID, see Table 1.
<status>
Notes:
Used only for confirmation of customer application status
Reference Note
Siemens
MC35_SAT_01_V01.01a - Preliminary
Unsigned Integer, range 0-255
0 Command performed successfully
32 TA currently unable to process command
132 TA currently unable to process command because
screen is busy.
Page 46 of 64 15.11.2001