Download
Share
Print this page
Snom C520 WiMi Setting Up
  1. Manuals
  2. Brands
  3. Snom Manuals
  4. IP Phone
  5. C520 WiMi
  6. Setting up

Snom C520 WiMi Setting Up

Fritzbox
Hide thumbs Also See for C520 WiMi:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Setting up a Snom C520 WiMi on a FritzBox
Introduction
Overview
Step by step guide - FritzBox
Step by step guide - Snom C520 WiMi
Configure Snom Identity
You can enlarge all pictures by clicking on them!
Introduction
To be clear, a FritzBox can easily act as a
functions of the FritzBox is unfortunately not comparable with that of a professional telephone system (
This article is based on a test on a
If you want to connect a new Fritzbox to a Snom phone and need help
Overview
The configuration of a Snom device on the FritzBox is relatively simple. First you have to
phone
.
The
user name
and
password
SIP registrar
and thus integrate VoIP phones just like ISDN or analog phones used to. However, the range of
FritzBox 7390
. It was tested on a Telekom All-IP connection.
are important here.
PBX
).
setting up the Internet access
create a new telephony device
, you can find a small guide in
in the FritzBox -
type is IP
this
article.

Advertisement

loading
Need help?

Need help?

Do you have a question about the C520 WiMi and is the answer not in the manual?

Questions and answers

Related Manuals for Snom C520 WiMi

Summary of Contents for Snom C520 WiMi

  • Page 1 , you can find a small guide in this article. Overview The configuration of a Snom device on the FritzBox is relatively simple. First you have to create a new telephony device in the FritzBox - type is IP phone...
  • Page 2 The user name should have at least 8 characters. AVM changed the password rules. Now it has to be more safe. And it is no longer important how long it is, but i should have a combi nation of lower and upper case letters numbers special characters as usual.
  • Page 3 Next select the item: " LAN/WAN (IP phone) ". Name the new phone with a unique name. Then click on " Next " again. Now assign a " user name " and a " password ". (The assigned phone number can also be used as user name if you want.) Then click on "...
  • Page 4 Select the phone number you want to use for outgoing calls. Then click on " Next " Now select the phone number under which the new telephone is to be reached (usually the same phone number as the outgoing number). Then click on "...
  • Page 5 Once the process has been successfully completed, you will receive another " Popup Window " as confirmation. After successful setup, the new Snom Phone should now be available under " Telephony Devices ", and can be configured there at any time.
  • Page 6 Step by step guide - Snom C520 WiMi With the setup of the Fritzbox, most of the setup is done. Now you only have to set up the C520 WiMi...
  • Page 7 Enter Snom C520 WiMi - Webinterface To access the device, enter the IP address of your C520 WiMi into your Internet browser (e.g. http://192.168.1.100 ). To find out the IP address of your C520 WiMi , press the configuration key (gear icon) "...
  • Page 8 If you now click the " save " button at the bottom, your Snom device should work immediately and the yellow LEDs should stop blinking.
  • Page 9 Setting up a FritzBox for Internet usage Setting up a Snom C520 WiMi on a FritzBox Setting up a Snom DECT Base of the M-SC-Series on a FritzBox Setting up a Snom DECT Base of the M-Series on a FritzBox...