Advertisement
Quick Links
Introduction
User Manual
ST-LEDSTROBE330
Unpacking:
Thank
you
for purchasing ST-LEDSTROBE330.
Every
unit
has
been thoroughly tested and
shipped
in
perfect
condition.
Carefully check the shipping carton for damag·e that may have occurred
during shipping.
If
the carton appears to
be damaged,
carefully inspect your
unit
for any
damage and
be
sure all accessories necessary to
operate the
unit
has
arrived
intacl In
the case damage
has
been
found
or parts are
missing,
please
contact the manufacturer or your dealer for further
instructions.
Do not return
this unit
to your dealer without any warning.
Warning:
To prevent or reduce
the
risk
of electrical
shock or
fire,
do not expose
this to
rain
or
moisture.
Caution
:
There
are
no
user serviceable
parts
inside this
unit. Do
not attempt any repairs yourself;
doing
so will
void
your manufacturer
warranty.
In
the
unlikely
event
your unit
may require service please
contact the
manufacturer or your
dealer.
Please
recycle the shipping carton whenever possible.
General Instructions
To optimize the performance of this product, please read
these
operating instructions carefully
to familiarize
you with the
basic
operations of
this
unit.
These instructions contain important safety
information
regarding
the
use
and maintenance of
this unit.
Please
keep this manual with the
unit,
for future
reference.
Features
•Multi-Colors
•Color
Strobe
•Electronic Dimming
0-100%
•DMX-512
protocol
Safety Precautions
•
Master/Slave synchronization
•
LED operation menu with
function buttons
•
Daisy
Chain
Units Together
in
OMX
Mode
•
Sound activated
• To reduce the
risk
of
electrical
shock
or
fire,
do
not
expose
this
unit to
moisture.
•
Do not spill water or other
liquids
into
or on to
your
unit.
• Be
sure that the local
power outlet match that
of the
required
voltage
for
your
unit,
• Do
not attempt
to
operate this unit
if
the
power
cord
has been
frayed or
broken.
Do not
attempt
to
remove or
break
off the
ground
prong from the electrical
cord.
This
prong
is
used to reduce the risk of
electrical shock and fire in case
of
a
internal
short.
•
Disconnect from main power
before
making any type of
connection.
• Do
not
remove
the cover
under
any
conditions.
There are user serviceable parts inside.
• Never operate this unit
when its
rear
cover is
removed.
• Never plug
this
unit
into
a dimmer
pack.
•
Always be sure to mount this
unit in
an area that
will
allow proper ventilation
.
Allow about 6' (15cm)
between
this device and a wall.
•
Do
not
attempt
to
operate this
unit,
if it becomes
damaged.
•
This
unit
is intended for indoor use
only;
use of this product outdoors voids all
warranties.
• During long
periods of
non-use,
disconnect
the
units
main
power.
Advertisement
Need help?
Do you have a question about the ST-LEDSTROBE330 and is the answer not in the manual?
Questions and answers