Wellion Galileo GLu/KET Owner's Manual page 53

Message What It Means
E 2 Not enough blood
sample on the test
strip to start
E 3 Test strip
removed during
countdown
E 4 Meter detects
extreme condition
E 5 Meter failure
What You Should Do
Remove the test strip and repeat the test with a
new test strip. See the chapters "Testing Your Blood
Glucose" or "Testing Your Blood Ketone"
Repeat the test with a new test strip. See the
Your Blood Ketone"
Move the meter into an area that is between 5°C to
45°C for glucose testing or 10°C to 40°C for ketone
testing and allow 10 to 15 minutes for it to reach
the new temperature. See the chapter "Storage and
again.
53