Wellion Galileo GLu/KET Owner's Manual page 19

Step 4: The display screen will indicate the alarm 1 status (the
default is OFF). You can turn it on by pressing OK and then
G l u
choosing the desired setting with the arrow buttons.
Step 5: Press OK and the hour will flash. Select the hour using
the arrow buttons. Confirm your choice by pressing OK and
advance to set minutes.
G l u
Step 6: The current minutes will flash. Use the arrow buttons
to select the correct minutes. Press OK to confirm your choice
and advance to set alarm 2.
Step 7: Set alarm 2 and 3 following steps 4 to 6.
G l u
Press the arrow buttons to select the next function to setup or
insert a test strip and begin testing. You can also turn off the
meter by pressing and holding the OK button until the display
screens shows OFF.
Anytime during setup, you may insert a test strip to begin testing. The changes you
have confirmed with OK so far will be memorized by the meter.
19