Wellion Galileo GLu/KET Owner's Manual page 13

Step 6 - Set Hour: The current hour will flash. Use the arrow
buttons to select the correct hour. Press the OK button to
confirm your choice and advance to set the minute.
Step 7 - Set Minute: The current minute will flash. Use the
arrow buttons to select the correct minute. Press the OK
button to confirm your choice and the result of your date and
time correction will flash as a whole.
Press the arrow buttons to select the next function to setup, or insert a test strip and
begin testing. You can also turn off the meter by pressing and holding the OK button
until the display screens shows OFF.
Anytime during setup, you may insert a test strip to begin testing. The changes you
have confirmed with OK so far will be memorized by the meter.
13