IMPORTANT
the test strip bottle.
tightly.
first opened, discard the bottle and any remaining test strips.
to reach the new temperature before use. Your meter will not begin testing if it detects an out-of-
range temperature.
test strip port.
Step 4: Squeeze a drop of glucose control solution (Level 0, Level 1 or Level 2) onto a
clean, dry, non-absorbent surface. Do not apply control solution to the test strip directly
from the bottle. Replace the bottle cap on the control solution bottle immediately
22
XXX
. Store the test strip bottle in a dry, cool place.
XX
which is printed on