Aruba AP-277 Installation Manual

Aruba AP-277 Installation Manual

Outdoor
Hide thumbs Also See for AP-277:

Advertisement

The Aruba AP-277 is an environmentally hardened, outdoor rated, dual-radio IEEE 802.11ac wireless
access point. This access point use MIMO (Multiple-in, Multiple-out) technology and other high-
throughput mode techniques to deliver high-performance, 802.11ac 2.4 GHz and 5 GHz functionality
while simultaneously supporting existing 802.11a/b/g/n wireless services. The AP-277 access point
works only in conjunction with an Aruba Controller.
AP-277 Operations
Wireless transceiver
Wireless access point (IEEE 802.11 a/b/g/n/ac)
Wireless air monitor (IEEE 802.11 a/b/g/n/ac)
Protocol-independent networking functionality
Compatibility with IEEE 802.3at PoE
Central management configuration and upgrades with an Aruba Controller.
Guide Overview
"AP-277 Hardware Overview" on page 3
"Before You Begin" on page 5
an outdoor wireless network.
"Installing the AP" on page 7
deployment of the AP-277.
"Safety and Regulatory Compliance" on page 16
compliance information.

Package Contents

AP-277 Access Point
Cable Glands x2
USB Console Cable
Copper Lug x1
M4 x 6 Screw x1
Installation Guide (this document)
The weatherproof caps for Ethernet, Console, and power interfaces are connected to the AP, not loose in the
package.
Mounting kits for use with the AP-270 Series access points are sold separately. Contact your Aruba sales
representative for details.
0511689-02 |
December 2014
AP-277 Outdoor Access Point
provides a detailed hardware overview of the AP-277.
provides key questions to ask and items to consider when deploying
describes the multi-step process for a successful installation and
provides an overview of safety and regulatory
Installation Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-277 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aruba AP-277

  • Page 1: Package Contents

    The weatherproof caps for Ethernet, Console, and power interfaces are connected to the AP, not loose in the package. Mounting kits for use with the AP-270 Series access points are sold separately. Contact your Aruba sales representative for details. 0511689-02 |...
  • Page 2 Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use these materials to repack and return the unit to the supplier if needed. | Installation Guide AP-277 Outdoor Access Point...
  • Page 3 USB Console Port, Reset button and LED AC Power Interface LAN Port WAN Port The AP-277 is equipped with one LED that indicates the system status of the AP. Table 1 AP-277 LED Meanings during Boot Up Color/State Meaning System LED...
  • Page 4: Ethernet Ports

    None Ethernet Ports AP-277 is equipped with two10/100/1000Base-T (RJ-45) Gigabit Ethernet ports (WAN and LAN port) for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE midspan injector.
  • Page 5: Before You Begin

    AC Power Interface The AP-277 is capable of AC power in the range of 100 - 240 VAC. The power cord or power connector kit is sold separately. Grounding Point Always remember to protect the AP by installing grounding lines. The ground connection must be complete before connecting power to the AP enclosure.
  • Page 6 DHCP Server with vendor specific options  Aruba Networks, Inc. in compliance with governmental requirements, has designed the AP-277 such that only authorized network administrators can change configuration settings. For more information about AP configuration, refer to the ArubaOS Quick Start Guide and ArubaOS User Guide.
  • Page 7: Installing The Ap

    For TWDR locations in the US please refer to www.wispa.org/tdwr-locations-and-frequencies. Identifying Specific Installation Locations You can mount the AP-277 access point on a wall or pole. Use the AP placement map generated by Aruba’s RF Plan software application to determine the proper installation location(s). Each location should be as close as possible to the center of the intended coverage area and should be free from obstructions or obvious sources of interference.
  • Page 8 Using the AP-270-MNT-H1 Mounting Kit The AP-277 access point can be installed on a wall or attached to a pole by using AP-270-MNT-H1 mounting kit. The AP-277 access point does not ship with any mounting kit. The AP-270-MNT-H1 mounting kit is available as accessories and must be ordered separately.
  • Page 9 7. Slide the holder of the AP into the opening of the mounting holder and use two M6x20 screws included in the package to fix the AP to the mounting holder as shown in Figure Figure 8 Attaching the AP to the Mounting Holder | Installation Guide AP-277 Outdoor Access Point...
  • Page 10 Figure 10 Attaching the Mounting Bracket to a Pole 2. Use the M10x30 screw (with washer) and M10 nut included in the package to attach the mounting holder to the mounting bracket as shown in Figure | Installation Guide AP-277 Outdoor Access Point...
  • Page 11 AP to the mounting holder as shown in Figure Figure 12 Attaching the AP to the Mounting Holder Figure 13 Attaching the AP to the Mounting Holder (Completed) | Installation Guide AP-277 Outdoor Access Point...
  • Page 12: Connecting The Ethernet Cable

    2. Slide the clamping ring over the cable. 3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable. 4. Remove the weatherproof cap on the Ethernet port. | Installation Guide AP-277 Outdoor Access Point...
  • Page 13 CAUTION Trade, and Industry. The AP-277 access point does not ship with any power cables. These are available as accessories and should be ordered separately. The AP-277 access point offers two ways to connect the unit to AC power. Two power cord variants are offered and a connector kit that allows the customer to assemble their own cable if the standard offering does not meet deployment needs.
  • Page 14: Verifying Post-Installation Connectivity

    Provisioning parameters are unique to each AP. These local AP parameters are initially configured on the controller which are then pushed out to the AP and stored on the AP itself. Aruba recommends that provisioning settings be configured via the ArubaOS Web UI only. Refer to the ArubaOS User Guide for complete details.
  • Page 15: Product Specifications

    Humidity: 5% to 95% non-condensing  Storage  Temperature: -40ºC to 70ºC (-40ºF to 158ºF)  For additional specifications on this product, please refer to the data sheet. The data sheet can be found at www.arubanetworks.com. | Installation Guide AP-277 Outdoor Access Point...
  • Page 16: Safety And Regulatory Compliance

    1. Log into the controller WebUI 2. Navigate to Maintenance > Controller > About. Aruba access points must be installed by a professional installer. The professional installer is responsible for ensuring that grounding is available and it meets applicable local and national electrical codes.
  • Page 17: Proper Disposal Of Aruba Equipment

    Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of...
  • Page 18 Gain d'antenne: 7.4dBi for 2.4G band; 9.1dBi for 5G band; Type d'antenne: 50 ohm, directionnel. | Installation Guide AP-277 Outdoor Access Point...
  • Page 19 This page is intentionally left blank. | Installation Guide AP-277 Outdoor Access Point...
  • Page 20: Contacting Aruba Networks

    Ireland, Israel, Japan, Korea, Singapore, South Africa, Taiwan, and the UK. All Other Countries +1 (408) 754-1200  © 2014 Aruba Networks, Inc. All rights reserved. www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550 AP-277 Outdoor Access Point | Installation Guide...

This manual is also suitable for:

Ap-270Apex0102

Table of Contents