Configuring The Device To Output Debugging Messages To The Terminal - Huawei AR530 Series Configuration Manual

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Device Management
A rule for outputting debugging messages to a channel is set.
By default, channel 0 is enabled to output debugging messages and the lowest severity is
debugging.
Step 4 Run:
quit
Return to the user view.
Step 5 Run:
terminal monitor
Display of logs, traps, and debugging message output is enabled on the user terminal.
By default, console display is enabled and terminal display is disabled.
Step 6 Run:
terminal debugging
Debugging message display is enabled on the user terminal.
By default, debugging message display is disabled on the user terminal.
----End

3.5.3.6 Configuring the Device to Output Debugging Messages to the Terminal

Context
After debugging messages are output to a user terminal, you can view debugging messages on
the user terminal (host from which you log in to the device through STelnet) to monitor device
running.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center monitor channel { channel-number | channel-name }
A channel used by the device to output debugging messages to a user terminal is specified.
By default, the device uses channel 1 to output debugging messages to a user terminal.
Step 3 Run:
info-center source { module-name | default } channel { channel-number | channel-
name } debug { state { off | on } | level severity }
A rule for outputting debugging messages to a channel is set.
By default, channel 1 is enabled to output debugging messages and the lowest severity is
debugging.
Step 4 Run:
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information Center Configuration
*
46