Probe Technical Specifications (Ebst) - Elcometer 456 Model E Operating Instructions Manual

20 PROBE TECHNICAL SPECIFICATIONS (EBST)

Available in a number of designs and scale ranges, all probes are supplied with an
Elcometer test certificate and a set of calibration foils appropriate to the scale range.
Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Non-
ferrous probes measure non conductive coatings on non-ferrous metal substrates. Dual
FNF probes measure both ferrous and non-ferrous applications with automatic substrate
detection.
Minimum Substrate Thickness Ferrous:
Maximum Operating
Temperature
(limited duty cycle)
Storage Temperature
SCALE 1
Range
Resolution
Accuracy
Probe Design
Ferrous
Ferrous Sealed
Straight
Non-Ferrous
Dual FNF
Ferrous
Non-Ferrous
Right Angle
Dual FNF
Anodiser Non-Ferrous
Ferrous
Non-Ferrous
PINIP
Dual FNF
* Whichever is the greater
www.elcometer.com
For more information / 1300 287 935
Non-Ferrous:
Ferrous:
Non-Ferrous:
PINIP:
PINIP
(High Temp)
-10 to 60°C (14 to 140°F)
0 - 1500µm (0 - 60mils)
0.1µm: 0 - 100µm; 1µm: 100 - 1500µm
(0.01mil: 0 - 5mils; 0.1mil: 5 - 60mils)
±1-3% or ±2.5µm (±1-3% or ±0.1mil)
Minimum Convex Minimum Concave
Surface Diameter Surface Radius
4mm (0.16") 25mm (0.98")
4mm (0.16") 25mm (0.98")
10mm (0.39") 10mm (0.39")
F Mode: 4mm (0.16")
12.5mm (0.49")
N Mode: 26mm (1.02")
4mm (0.16") 25mm (0.98")
10mm (0.39") 14mm (0.55")
F Mode: 4mm (0.16")
12.5mm (0.49")
N Mode: 26mm (1.02")
10mm (1.38") 14mm (0.55")
4mm (0.16") 60mm (2.36")
10mm (0.39") 50mm (1.97")
F Mode: 4mm (0.16")
65mm (2.56")
N Mode: 26mm (1.02")
77 of 89
456 Dry Film Thickness Gauge
0.3mm (12mils)
0.1mm (4mils)
150°C (300°F)
80°C (176°F)
80°C (176°F)
: 250°C (480°F)
Minimum
Headroom
85mm (3.35")
85mm (3.35")
85mm (3.35")
88mm (3.46")
28mm (1.10")
28mm (1.10")
38mm (1.50")
100mm (3.94")
170mm (6.69")
180mm (7.09")
180mm (7.09")
mail@burwell.com.au
R
Minimum
Sample Diameter
4mm (0.16")
4mm (0.16")
4mm (0.16")
F Mode: 4mm (0.16")
N Mode: 6mm (0.24")
4mm (0.16")
4mm (0.16")
F Mode: 4mm (0.16")
N Mode: 6mm (0.24")
4mm (0.16")
4mm (0.16")
4mm (0.16")
F Mode: 4mm (0.16")
N Mode: 6mm (0.24")
76
/ www.burwell.com.au