Gauge Firmware Updates (Bst) - Elcometer 456 Model E Operating Instructions Manual

15 GAUGE FIRMWARE UPDATES (BST)

Each time the Elcometer 456 gauge is connected to ElcoMaster™ (see
pages 41-43); if the computer has access to the internet, ElcoMaster™
automatically checks to see if there are any gauge firmware updates for
the connected gauge.
Typical firmware updates include gauge enhancements, amendments,
language updates, etc. Users cannot upgrade a Model B to a Model S for
example, nor can a ferrous gauge be upgraded to a dual ferrous/non-
ferrous gauge.
65
For more information / 1300 287 935
R
ElcoMaster™ will inform the user when
there are any firmware updates available
for the connected gauge by displaying
the 'Update Gauge' button.
Please note that users can update the
gauge firmware via a USB connection
only .
Clicking the 'Update Gauge' button will
display a list of the 'Fixes' in all the
updates that have been released since
the gauge's last upgrade.
Press 'Next >' to continue.
Ÿ
Warning - updating the gauge firmware
will result in all readings, batches,
statistics and calibrations being deleted.
The gauge will also be returned to the
factory default settings.
P r e s s ' N e x t > ' t o c o m m e n c e
Ÿ
downloading the latest firmware to the
Elcometer 456
Warning - Do not switch off the computer
or disconnect the gauge during the
gauge upgrade.
66 of 89
456 Dry Film Thickness Gauge
www.elcometer.com
mail@burwell.com.au / www.burwell.com.au