Gauge & Probe Accessories (Ebst) - Elcometer 456 Model E Operating Instructions Manual

ULTRA / SCAN PROBES (continued)
Ultra/Scan probe end caps wear over time and the gauge will inform the user during the
calibration procedure if the cap needs replacing. When tested using smooth surfaces,
probe end caps have been scanned in excess of 50km (30 miles).
Replacement caps are available to purchase from Elcometer or your local supplier.
Description
Replacement Ultra/Scan Probe End Caps (3 per pack)
21 GAUGE & PROBE ACCESSORIES (EBST)
Probe Placement Jig
An ideal accessory for measuring coatings not only on small or complex
components but also when the highest levels of repeatability and accuracy
are required. Each Probe Placement Jig is supplied with a probe housing
to suit Scale 1 or Scale 2 Straight Probes and a component holder.
Additional accessories are also available.
Description
Probe Placement Jig
Component Hand Vice
Cable Release Assembly
Jumbo and V-Probe Adaptors
Jumbo and V-Probe Adaptors, when attached to any Elcometer 456 Scale 1
or Scale 2 straight probe, improve measurement accuracy and repeatability
on flat and curved surfaces.
Description / Part Number
Jumbo Adaptor
V-Probe Adaptor
Gauge Accessories
Description / Part Number
Protective Case
Plastic Transit Case
Benchtop Inspection Stand
Self Adhesive Screen Protectors (x10)
USB Bluetooth Adaptor
- for PC's without Bluetooth
USB Cable
www.elcometer.com
For more information / 1300 287 935
Part Number
T95012880 Dual FNF Probe Housing Adaptor
T95013028 Mini Probe Housing Adaptor
T95012888
F and N Probes
T9997766-
T9997381-
Separate Gauges
T99923369
T45623465
T45622371
T99922341
T99924797
T99921325
81 of 89
456 Dry Film Thickness Gauge
Part Number
T456C23956
Part Number
T95015961
T95016896
Dual FNF Probes
T99913225
T99913133
Integral Gauges
T45621820
T45623466
-
T99922341
T99924797
T99921325
mail@burwell.com.au / www.burwell.com.au
R
80