Join The Zigbee Network; Binding; Sleeping Mode - netvox ZigBee ZB11B User Manual

A. Turn it on: Press the Binding Key once. The indicators will flash once, and the device is ready to be
used.
B. Turn it off: Press and hold the Binding Key for 15 seconds. The indicator will keep flashing. Release
the Binding Key, and the device would be turned off.
It is recommended that having a 5-second interval between turning on and turning off ZB11B.

5-2. Join the ZigBee Network

After ZB11B is turned on, it will search for an existing ZigBee network and send a request to join the network
automatically. While ZB11B is under the coverage from a coordinator or a router whose permit-join feature is
enabled, ZB11B will be permitted to join the network.
Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please refer to
the user manual of the coordinator or the router to enable the permit-join feature).
Step2. Turn on ZB11B. It will start to search and join the network.
Step3. The indicator will flash
Step4. The indicator will flash
not flash.

5-3. Binding

To make ZB11B work with another device, users need to bind the two devices:
Step1. Press the Binding Key to broadcast the binding request. The indicator will flash
Step2. The indicator flashes
times.

5-4. Sleeping Mode

ZB11B is designed to go into sleeping mode for power-saving in some situations:
A. While the device is in the network → the sleeping period is 5 minutes; it will wake up every 5
minutes to keep online.
B. When it doesn't find a network to join →ZB11B will go to sleeping mode. It will wake up every 15
minutes to search a network to join.
C. Once ZB11B was joined to a network and by any chance the network is no longer existed or the
device is out of the network →ZB11B will wake up every 15 minutes to find the network it joined
before.
It never keeps in sleeping mode and continues to find out a network every 15 minutes. This condition would
consume up to 30 times power spending compared to normal-operating status. To prevent this unwanted power
consumption, we recommend that users remove the batteries to power off the device.
green once when it finds out a network to join.
green 5 times after it is joined successfully. Otherwise, the indicator will
green 5 times after the binding is completed; otherwise, it flashes
6
green once.
green 10